Nissan GT-R Track Pack

GT-R owners are among the most demanding in the world. In response to demand Nissan has replied with the GT-R Track Pack - a new version of the Nissan supercar for those drivers who require a faster, lighter, harder GT-R and one that has that extra edge at the race track.

The new car is called the Track Pack and offers Nissan GT-R drivers a more focussed driving experience while still remaining fully road legal. Unlike aftermarket modifications, this GT-R has the full blessing of the car's creator Kazutoshi Mizuno.

On the outside, the new car features special six-spoke RAYS alloy wheels with gloss black centres. In addition to looking good these wheels give a total weight saving over the standard 2012 GT-R of 10kg.

Additional brake cooling ducts built into the carbon front splitter reduce the operating temperature by as much 100 degrees during track use, whilst similar ducts hidden behind the rear wheels channel cooling air over the rear discs.

Track Pack also features special, stiffer suspension designed to optimise track performance. It comprises a harder set-up and increased body rigidity and has been jointly developed with the Nissan GT-R development driver Toshio Suzuki during extensive testing at the Nurburgring. It will allow GT-R customers to achieve the perfect set-up at the track but, thanks to the special dampers, customers will be able to change the suspension for road-use at a flick of a switch, making the Nissan GT-R Track Pack suitable for all environments.

The changes that make up the Track Pack are not just under the shell, though. Inside the car loses rear seats but gains two track-ready front sports seats covered in what is affectionately referred to as 'magic cloth' by the father of GT-R, Kazutoshi Mizuno. The Track Pack also boasts special blue-on-grey sports seats made from fabric and leather. The high friction fabric is a special material that allows occupants to 'stick' to the seats during hard cornering and braking.

A Track Pack emblem also sits on the dashboard helping to identify this special GT-R model, whilst more comfortable seat belts, an enhanced Bose audio system, and a rear-view camera as fitted to the standard MY2012 GT-R also feature.

Performance statistics remain unchanged to the 'standard' 2012 Nissan GT-R. That means Track Pack customers will still be able to enjoy the GT-R's 550PS power output, and a 0-62 time of just 2.8 seconds.

The Track Pack is only available in the UK and Japan, and is priced at £10,000 more than the standard £74,450 Nissan GT-R

Nissan NV200 Taxi

Each day, 600,000 New Yorkers hop in the back of a taxi - the iconic yellow cab that is a symbol of New York City around the world. Starting now, the first full vehicle prototype of the Taxi of Tomorrow can be seen by drivers, passengers and owners. The 2014 Nissan NV200 Taxi, New York's Taxi of Tomorrow, made its global debut at a special event in SoHo with Nissan President and CEO Carlos Ghosn and New York City Mayor Michael R. Bloomberg.

Following the event, the Taxi of Tomorrow is headed to the 2012 New York International Auto Show, where it will be on display for New Yorkers and visitors from around the world. The auto show at the Jacob Javits Center is open to the public April 6-15.

"We're proud to introduce a new era of urban mobility to New York with the Nissan NV200 Taxi - New York City's Taxi of Tomorrow," Ghosn said. "The exclusive Taxi of Tomorrow draws on Nissan's global experience in commercial vehicles, as well as insight from New York City taxi drivers and passengers, who helped identify important improvements over today's cabs. The Nissan taxi will deliver unprecedented levels of innovation and comfort to New York's 600,000 daily taxi riders."

After a rigorous, two-year competitive bid selection process, the New York City Taxi and Limousine Commission (TLC) selected the Nissan NV200 Taxi in May 2011 as the exclusive taxi of New York City beginning in late 2013. The Cooper-Hewitt National Design Museum, the Design Trust for Public Space and Smart Design also have engaged with Nissan and the TLC in the vehicle's design.

"The Nissan NV200 unveiled today will be the safest, most comfortable and most convenient taxi the City has ever had," said New York City Mayor Michael R. Bloomberg. "New York City cabs have always been iconic, and now they will set a new standard. The 600,000 passengers who use taxis to get around every day deserve the cutting-edge technology and top-of-the-line safety features that this model delivers."

Designed from the inside out, using input from New York taxi drivers, medallion holders, fleets and passengers, standard interior features and passenger amenities include:

• Ample room for four passengers and their luggage, offering substantial improvements over current taxi models
• Sliding doors with entry step and grab handles, providing easy entry and exit
• Transparent roof panel, presenting unique views of the city
• Opening side windows
• Independently controlled rear air conditioning
• Active Carbon Lined headliner to help neutralize interior odors
• Overhead reading lights for passengers and floor lighting to help locate belongings
• A mobile charging station for passengers, including a 12-volt electrical outlet and two USB ports
• Breathable, antimicrobial, environment-friendly, durable and easy-to-clean seat fabric, simulating the look and feel of leather
• Flat "no hump" passenger floor area for more comfortable ride

Other notable vehicle features are:

• Proven 2.0L 4-cylinder powertrain, engineered to enhance the emission performance and fuel efficiency of the taxi fleet
• 150,000 mile powertrain warranty
• A low-annoyance horn with exterior lights that indicate when the vehicle is honking, so the horn is used less frequently. A 6-way adjustable driver's seat featuring both recline and lumbar adjustments, even with a partition installed
• Unique driver's seat material and stitching to promote improved airflow
• USB Auxiliary audio input and charge port for driver
• Standard navigation system with integrated rearview backup monitor
• Hearing Loop System for the hearing impaired
• Driver and passenger intercom system
• Pre-wiring for taxi T-PEP system

In addition, important safety features of the Taxi of Tomorrow include:

• Only taxi ever to be safety tested and certified with full taxi partition
• Front and rear-seat occupant curtain airbags, and seat-mounted airbags for the front row
• Standard traction control and Vehicle Dynamic Control
• Sliding doors to lessen risk of pedestrians, cyclists and other motorists getting struck by doors opening unexpectedly
• Lights that alert other road users that taxi doors are opening

With more than 13,000 taxis traveling a cumulative 500 million miles per year, building a taxi with the utmost durability is critical to the development process. Drawing on its full range of commercial vehicle experience - including providing taxis for municipalities around the world - Nissan will conduct significant validation testing for the Nissan NV200 Taxi prior to the vehicle going on sale. Additionally, as acknowledged by Mayor Bloomberg during the May 2011 announcement, the Taxi of Tomorrow will be the first New York taxi to be crash-tested with taxi equipment installed, including the partition.

Nissan has also partnered with the Braun Corp., the world leader in automotive mobility products, to develop, engineer and produce a creative solution for a wheelchair-accessible taxi in New York. Drawing on Braun's innovation and experience in the mobility industry, Nissan will offer a mobility solution to New York taxi medallion holders when the taxis go on sale in 2013.

As part of the Taxi of Tomorrow program, Nissan is also working with the City and taxi owners on a pilot program to study the use of zero-emission, electric vehicles as taxis. Nissan will provide six 100-percent electric Nissan LEAFs and three Level 2 charging stations at no charge to taxi owners and New York City to test the electrification of the taxi fleet.

The Nissan NV200 Taxi will be produced in North America at Nissan's manufacturing facility in Cuernavaca, Mexico. Total manufacturer suggested retail price (MSRP) of the vehicle, with all planned standard features, will be approximately $29,700.

Nissan Juke Nismo Concept

With its distinctive styling Nissan Juke has redefined the highly competitive B-segment, but the Nissan Juke Nismo Concept is even more dramatic. It's lower, wider and has a tougher stance. Even standing still, it's clearly a performance car.
Aimed at a car-loving audience looking for a car that reflects an edgy personality, Nissan Juke Nismo Concept magnifies the standard car's unique mix of compact car agility, coupé-like responses and SUV strength.

Nissan Juke Nismo Concept

"The global sales success of Nissan Juke has proved beyond doubt that customers are looking for something different," said Andy Palmer, Executive Vice President, Nissan Motor Co., Ltd. "The Juke Nismo Concept takes that idea to the next level. It's energetic, distinctive and highly desirable."
Finished in signature Nismo colours of pearl white with red highlights, the Nissan Juke Nismo Concept wears a body kit created by Nismo's aerodynamic specialists whose skill has been honed perfecting racecar bodywork.
And as on a racecar, the Juke Nismo Concept body kit is designed not just to look good, but also to be dynamically highly efficient. New parts include revised lower bumpers front and rear, wider fenders and sill side skirts.

Nissan Juke Nismo Concept

The grille pattern has been changed while the tailgate spoiler has been modified by the addition of side elements to control airflow more efficiently. Even the shape of the door mirrors has been altered to enhance the car's aerodynamic performance and reduce front and rear lift without increasing drag.
This reduction in lift means the contact patch of the tyres has been increased to improve grip, which is further enhanced by the arrival of stylish new 19-inch alloy wheels.
Naturally the Nismo treatment extends to the chassis which has been lowered and stiffened using proprietary parts of the sort that will be available from the expanded Nismo's parts catalogue, while the 1.6-litre direct injection turbo gasoline engine has been uprated to deliver more power and performance.

And Nismo touches can also be found in the interior of the Concept, where parts that interact with the driver's sense of sight, sound, look and feel - such as the steering wheel, pedals, gauges, shifter knob and door trims - have been redesigned to provide greater involvement when driving. Further underlining the performance aspects of the car, special leather-trimmed bucket seats have been added while the importance of the tachometer means the dial and needle are illuminated in red.

A feeling of enhanced sporting quality in the cockpit can be attributed to a matt effect applied to previously reflective surfaces, while the dramatic centre console - shaped to resemble a motorcycle fuel tank - has been given a metallic coating to enhance the purposeful feeling of the Concept.
"As the Concept shows, Nismo brings new levels of individuality to mainstream Nissan cars like Juke. The future for Nismo is to develop premium sports designs for an ever-widening range of customers," said Nismo President, Shoichi Miyatani.

"Our forthcoming range of cars will be just as accessible and innovative as every Nissan product, but with added Nismo energy they will be even more fun to own and drive," he added.

Nissan Juke-R Concept

Dubbed the world's fastest crossover, Nissan Juke-R is a unique concept car that combines the power, speed and handling of Nissan's flagship GT-R sports car with the bold, exciting design of the Juke crossover model. Images and video reflect the thought-provoking, energetic style of this urban rebel crossover, while its foreboding matt black finish enhances the car's rebellious personality.

The car's unique, impactful styling places Juke's curves and lines over GT-R's 3.8-litre engine, drivetrain and suspension, making Nissan Juke-R the most testosterone-packed compact crossover in the world. It is a force to be reckoned with not only in performance but also in its bold and menacing design.

Large, provocative vents in the front bumper provide cooling for the Nissan Juke-R's twin turbo V6 engine, while subtle submerged ducts in the bonnet help draw air through the engine bay. Flared wheel arches cover the GT-R's 20-inch RAYS forged alloy wheels to merge with a new sculpted skirting. At the back of the car a dynamic split rear wing provides the supercar crossover with down-force, while twin pentagonal exhausts emit the GT-R's evocative engine note.

Inside, the Juke's motorcycle-inspired console is at the centre of a modified interior cabin fitted out to go racing complete with twin race seats, full race harness and a race-spec roll cage. GT-R steering wheel, pedals, dials and 7-inch touch-screen display are built into a modified version of Juke's dashboard.

Officially announced by Nissan Europe in October 2011, Nissan Juke-R is not a production car but a special, road legal concept car. Two versions of the Nissan Juke-R are being created - one in left-hand-drive and one in right-hand-drive. Nissan Juke-R will go into testing in late November 2011 before it's unleashed on the world to take on the urban playground.

Nissan Pivo 3 Concept

It all started in 2005. Since featuring PIVO 1 at the Tokyo Motor Show, Nissan has introduced six other EV concepts, all demonstrating Nissan's dedication to creating exciting and innovative zero emission mobility solutions. And at the 42nd Tokyo Motor Show, Nissan will be revealing the PIVO 3, its eighth EV concept. Yet this is not just a show car - PIVO 3 is what Nissan envisions to be a more "realistic" EV of the near future.

PIVO 3 takes Nissan's EV portfolio another step forward. Building on the pioneering PIVO 1 and PIVO 2, the new PIVO 3 concept moves from the realm of imagination into a fully-evolved vehicle that envisions life in tomorrow's cities. Where PIVO 2 was a highly innovative vehicle that stood alone as a concept car, PIVO 3 evolves in the direction of "smart community" with greater feasibility, credibility and an extended scope of mobile performance.

Nissan believes PIVO 3 is very close to what the next step in urban mobility will be.

Francois Bancon, Deputy Division General Manager of Product Strategy and Product Planning Division, explains: "PIVO is one of the answers for active urbanists living in mature markets. Through the three PIVO proposals, we have gained a deep understanding of their needs in such large, metropolitan areas.

Each of the eight concepts that we have created address different needs, different communities, different lifestyles for different markets. That makes zero emission mobility an ambitious statement for the company… At Nissan, we believe that the world is changing and mobility has a role to play to make it better."

As part of Nissan's long-term commitment to lead the way in mass-marketed zero-emission mobility, PIVO 3 stands alongside the Nissan LEAF as a practical approach to sustainability for the real world. Nissan LEAF is a compact hatchback; PIVO is an ultra-compact city commuter targeting singles and couples living in and enjoying an urban lifestyle.

Comes when it's called, with automated parking and automatic charging functions

With Automated Valet Parking (AVP), PIVO 3 will revolutionise the parking experience by connecting to and responding to infrastructure. No longer does a driver need to find a parking space, physically park the car, or remember which space the car is parked. Nissan PIVO 3 can park automatically in specially-equipped parking lots. While the driver shops or takes care of business, PIVO 3 recharges itself or sells excess power to the grid. Later, the driver can call PIVO 3 and summon it to the driver's location using a smartphone. This AVP function not only creates more freedom in private life, but it can also contribute to society and benefit the environment by supplying electric power on the regional grid. PIVO 3 points the way to mobility as a service - always on, available and reliable.

U-turn in 4 metres, with zero turn gap

Nissan PIVO 3 is a remarkably compact package, measuring just under 3m in length and seating three in a 1+2 layout. The compact body and narrow-tread wheels with IWM (in-wheel motors) enable an extremely small turning radius with zero turn gap. PIVO 3 is very agile and can effortlessly park in tight spaces. Such manoeuvrability also aids the driver who has taken a wrong turn onto a narrow street. Instead of having to back out in reverse gear, PIVO 3 can make a legal U-turn in a road only 4m wide. Considering that most public roads around the world are at least 4m in width, this means that a U-turn is almost always possible because of its 2m minimum turning radius.

Package leverages electric drive, by-wire technology and in-wheel motors

Like the previous PIVO 1 and PIVO 2, PIVO 3 uses electric power and by-wire control technology to permit freedom of layout and the downsizing or elimination of many mechanical parts. Again, similar to PIVO 2, PIVO 3 uses in-wheel motors (IWM) to give wheels great freedom of movement, and more space in the vehicle chassis. Moreover, PIVO 3 balances the advantages of IWM with user friendliness by keeping wheel rotation within a range that will maintain a natural steering feel for the typical driver.

Seamless mobility built on friendly innovation

Guided by the philosophy of "friendly innovation", Nissan seeks to ensure that the customer perceives cutting-edge technology as being truly easy to use and understand. In this context, one of the engaging features of Nissan PIVO 3 that it inherits from the previous PIVO 2 is the Robotic Agent interface. The car acts as a partner or personal assistant to the driver, with companionship conveyed by the Robotic Agent. Based on this approach, PIVO 3 supports a life of seamless mobility, using cloud computing and infrastructure (e.g. AVP and charging facilities) to connect with the city. A "smart" personal filter selects information relevant to the current driver, location and vehicle.

Mature exterior styling integrates narrow-tread rear tyres

Externally, Nissan PIVO 3 shows mature styling with bold surfaces and a new stance. Front fenders extending out of a crouching chassis with a sculptural front exude a look of agility. Long body lines and angular planes combine in a dynamically active form. Rear styling cues emphasise strong presence within compact dimensions. Trim and stylish mobility is promised by the new stance, which attractively reveals narrow rear track width.

Interior design

Inside, Nissan PIVO 3 presents a distinctive design centering on driving controls that seamlessly integrate with interior and exterior styling. Side-view monitors take the place of mirrors, using Nissan's Around View Monitor system to reveal the car's surroundings and help minimise blind spots. The centre console features an ultra-wide display for GPS and other information, and together with a sub-monitor and the Robotic Agent, is positioned to interact discreetly with the driver. Carefully stitched leather and silver-hued trim meld in a "snow white" and "EV blue" color scheme to produce a tasteful, high-quality ambience. Smooth surfaces add to the refined feel within the compact cabin dimensions, rather than emphasising environmental frugality.

Next stage of urban mobility

With its home charging capability, Nissan LEAF liberates the driver from dependence on gasoline. It also has the potential to store renewable energy and even supply the household with electricity. From this "LEAF to HOME" connection, Nissan PIVO 3 expands the possibilities to include the entire electrical grid. When EVs represent a larger percentage of all cars, collectively serving as part of a city's infrastructure, advanced electric vehicles like PIVO 3 could help balance electric power supply and demand - around the clock and around the town. Such a powerful synergy of smart cities, cloud computing and EVs opens the door to the urban society of tomorrow.

Here, once again, Nissan demonstrates its commitment as a responsible corporate citizen to zero emission mobility with an inspired vision of the way we will live and drive in the near future.

Nissan GT-R

2012 Nissan GT-R the new model goes on sale November 24, 2011 in Japan and arrives in European showrooms in January 2012.

Significant improvements to the engine, chassis and transmission, plus a new lightweight "For TRACK PACK" version (currently available in some market such as Japan, UK), which accentuates the pure performance potential of the Nissan GT-R are the key changes to Nissan's flagship model for the 2012 model year.

When it was launched, the iconic GT-R created a new type of super car. Performance and handling were exceptional, of course, but more importantly the car's potential was accessible to all drivers under all conditions. It was greeted with universal praise but Nissan's policy of constant development means the GT-R continues to evolve.

The latest version, which is due on sale in Europe in January 2012, is the most efficient yet. It offers even greater performance but this is allied to improved economy and lower emissions to provide further excitement to drivers and passengers.

As well as more power, the 2012 Nissan GT-R has a newly developed asymmetric suspension which compensates for greater weight on the driver's side in RHD models, enhanced transmission 'feel' and a stronger body for extra rigidity and ever better handling.

There's also the arrival of a new "For TRACK PACK" version (currently available in some markets such as Japan, UK) which inherits the DNA of the Spec-V model and turns the Nissan GT-R into a light-weight two seater for the ultimate in trackday performance.

Engine

By improving the Nissan GT-R's engine efficiency, its fuel economy has been decreased from 12L to 11.8L/100 Kms, while engine output rises significantly from 390kW to 404kW (550PS) from 6,400rpm with maximum torque of from 612 to 632Nm (64.5kgfm) from 3,200 to 5,800 rpm.

Engine response and torque at mid- and low-speeds, and power at high revolutions, has been significantly improved, mainly due to:

• Improved intake efficiency
• Better air flow resistance, which has been reduced by the addition of an intake manifold fitted to the head of each unit and the use of resin in the enlarged air intake duct for the intercooler
• Improved exhaust emissions efficiency and enhanced control
• Reduced air flow resistance thanks to a more compact under floor catalyzer which improves emissions efficiency and reduces weight
• Improved exhaust valve cooling performance by the adoption of a newly-designed metallic sodium-filled valve. At the same time, valve control timing, the air mixture ratio and ignition timing have been improved

Transmission

Shift feels and quietness has been refined thanks to a strengthened design of the shift fork arm and a firmer fixing bearing for the flywheel housing. A special differential oil R35 COMPETITION Type 2189E (75W140), which was developed for competition is now used in every version of Nissan GT-R.

Body

As well as greater power and torque, the reinforcing of certain areas around the rear part of the engine compartment and dash panel deliver more responsive handling while a greater sense of the vehicle's grip on the road is transmitted to the driver.

At the same time, more precise production methods, accompanied by advancements made in the vehicle body, have improved the inter-vehicle detection capability. This was achieved by changes in the positioning of the sensor and more rigid, highly-damped vehicle body, and by adding a more accurate acceleration sensor in areas with higher sensitivity in the vibration testing of each vehicle body.

Suspension and brakes

Accounting for the added weight of the driver in a right-hand drive vehicle coupled to the fact that the propeller shaft for front wheels is located on the right side of the vehicle; the Nissan GT-R's suspension in RHD versions has been set asymmetrically. For the front suspension, there's a harder spring rate on the left side while at the rear the suspension arm has been installed upwards on the left side and downwards on the right. This means an imbalanced wheel load when the car is stationary, but which is equalized during driving, providing improved responsiveness, smoothness and steering feel, as well as enhanced cornering stability and riding comfort (for RHD only).

NCCB (Nissan Carbon Ceramic Brakes) are available as a factory-installed option for the Nissan GT-R Premium Edition and EGOIST grade. These brakes accentuate the car's agile road hold and supple ride feel thanks to a dramatically-reduced spring weight and refined, sharp braking performance unique to carbon ceramics. (In addition, service parts prices for the rotors and pads have been reduced.)

Interior

The quality feel of the instruments placed in front of the driver have been enhanced by the addition of blue lighting inside the tachometer ring to match the shift position indicator light giving a more sophisticated atmosphere in the cockpit.

Rear View Camera device will be standard on all models.

The Bose® sound system woofers, have been changed to Bose® Precision Sound System woofers that were developed for the EGOIST grade to further enhance sound quality.

"For TRACK PACK" (currently available in some markets such as Japan, UK)

"For TRACK PACK" (currently available in some markets such as Japan, UK) is a new version in the Nissan GT-R line up, designed for customers who want to enjoy a more visceral driving experience in their Nissan GT-R.

Jointly developed with NordRing Company in Japan, it features revised suspension settings, extra brake cooling (front and rear), and aluminum-alloy wheels from Spec-V made by Rays (with black quartz chrome color coating). The front spoiler with carbon air duct has been exclusively made for this edition and is installed as a set.

To reduce the car's weight, this edition is a two-seat configuration with quilted fabric mats in place of the rear seats. The front seats are covered with leather and high-grip fabric, newly developed for the "For TRACK PACK" version and which firmly holds the driver in place during even the most spirited of trackday action (RHD only).Nissan GT-R.

Nissan Qashqai

In line with its Pure Drive strategy, Nissan continues to innovate to improve CO2 and fuel economy performance to deliver no compromise, real benefits for consumers. As part of this strategy Nissan is introducing a new Pure Drive version of the top selling Nissan Qashqai equipped with a new state-of-the-art 1.6 dCi engine.
This new engine is the perfect example of Nissan's Pure Drive strategy, replacing the previous 2.0 dCi with a more efficient engine that not only delivers lower emissions and considerably improved levels of fuel economy but which offers the same level of performance as the bigger engine.
Best of all, when coupled with Nissan's Stop / Start system CO2 emissions tumble to just 119 g/km.
At the same time, innovative new options become available on the Nissan Qashqai range, including a new CVT gearbox and, for the first time on a C-segment car, Around View Monitor. AVM uses a series of small cameras located on the exterior of the vehicle to make parking and manoeuvering as safe as possible by giving the driver a real-time helicopter view of the environment around the car.

The moves will underline Nissan's leadership of the booming Crossover market and keep Nissan Qashqai one, or even two, steps ahead of its opposition.
"When Qashqai was launched in 2007 it quickly re-wrote the C-segment rule book, offering innovation and character in a previously conservative market. Its combination of SUV looks and toughness with dynamic handling, strong performance and plenty of interior space captured the imagination of the car-buying public."

"After a little more than four and a half years, we've built more than one million Qashqai and seven-seat Qashqai+2 models at our Sunderland factory where we have three shifts working 24 hours a day to keep up with demand. On average we build 1,200 examples every day, with more than 80 per cent of production exported from the UK," said Trevor Mann, Senior Vice President, Manufacturing and Supply Chain Management, Nissan Europe.
"The new Pure Drive 1.6 dCi Nissan Qashqai, especially with innovative features like Stop / Start System and the Around View Monitor, will cement our leadership of the Crossover segment," he added.
The new engine and Stop / Start System has been a joint development between Europe and Japan with Alliance Partner Renault concentrating on the engine and Nissan perfecting the automatic cut off system. It had been originally hoped to introduce the two elements at the same time.
Unfortunately the tragic earthquake which affected Japan so badly at the start of the year has led to a short delay in the manufacture of the Stop / Start System's electronic components. As a result, Nissan Qashqai models built between now and December and powered by the new engine will not have Stop / Start. But even without the system, CO2 emissions are a still impressive 129g/km. From January production, however, Stop / Start System will become a standard feature.

"The new Alliance 1.6 dCi engine is such a significant development that we decided not to wait for the Stop / Start System before launching the car. Lowering emissions is a priority at Nissan and it was felt better to reap the benefits of the dCi engine as soon as we could," said Pierre Loing, Vice President, Product Planning, Nissan Europe.
The Pure Drive designation is given to every Nissan product that emits 130g/km of CO2 or less. On its introduction the 'cut off' point was 140g, but as part of the Nissan Green Programme membership of this exclusive club gets tougher all the time. The programme will instigate a further drop to 120g in 2013.
Nissan's Pure Drive champion is, naturally, the zero emission 100% electric Nissan LEAF but the recently introduced Nissan Micra DIG-S heads the conventionally-powered cars. Its technically advanced three-cylinder 1.2-litre petrol engine uses direct injection and a supercharger to deliver brisk performance but with excellent fuel economy and CO2 emissions of just 95 g/km.
The Nissan Qashqai 1.6 dCi
Available on both Nissan Qashqai and Qashqai +2 models, the new dCi engine has been jointly developed with Alliance partner Renault.
Its arrival in Qashqai is in line with Nissan's policy of 'penalty-free' engine downsizing: the 1.6-litre direct injection diesel engine gives the fuel economy and emissions expected from an engine of its size, but with power and torque figures anticipated from a 2.0-litre engine.
Notably compact, the engine, which displaces 1598cc, is a state-of-the-art unit with more than 30 patents registered representing an investment of €230 million.
Thanks to its 130PS, it is the most powerful of its size in the world while its peak torque figure - an exceptional 320Nm: exactly the same as the 2.0-litre dCi it is replacing - is developed at only 1,750rpm with some 80 per cent available from a mere 1,500 rpm. The resulting dynamic performance lifts the latest Nissan Qashqai well above the 1.6-litre class norm: top speed is 190 km/h, with 0-100 km/h taking 10.3 secs.
But this performance gain is not at the expense of the environment. Its combined cycle fuel consumption (NEDC) is 24 per cent better than the 2.0 dCi - 4.5 l/100km as against 5.9 l/100km - while it produces much lower CO2 emissions - 119 g/km rather than 155 g/km.

These figures refer to the 2wd manual version of Nissan Qashqai: the equivalent Qashqai+2 with Stop / Start System produces 123g/km, while figures for 4wd versions are 135g and 139g respectively.
High Technology Inspiration
The starting point for the engineering team was 'square' architecture, allowing large-diameter valves to be housed in the cylinder head for more efficient filling of the combustion chambers. It's a technique inspired by motor racing and seldom seen in modern diesel road car engines.
Downsizing
Reducing the weight of the cylinder block, cutting mechanical losses and reducing dynamic forces have resulted in the best balance between fuel consumption and performance.
Stop / Start System
The 1.6 dCi features Stop / Start System. Reducing CO2 on a mass-market car to 119g/km brings real economic as well as environmental benefits for many consumers.
Smart Energy Management
Stop / Start System is combined with alternator regeneration, using deceleration energy to charge the battery. The regenerative braking system alone is responsible for a 3% reduction in CO2
Cold-Loop, Low-Pressure Exhaust Gas Recirculation (EGR)
This dCi engine is the first to have been developed in Europe using cold-loop, low-pressure exhaust gas recirculation. By recycling the exhaust gas at a lower temperature, emissions of nitrogen oxides and CO2 are reduced.
Thermo Management
The system uses a valve located in the cooling circuit upstream of the cylinder head and cylinder block. When the engine starts from cold, the valve is closed and prevents water from circulating around the combustion chambers. This allows the engine to reach its ideal working temperature more quickly, optimizing combustion efficiency.
Internal friction is also reduced thanks to the quicker warm-up of the oil. The result? More power, lower fuel consumption and lower emissions.
Variable Displacement Oil Pump
Unlike a conventional oil pump which has a fixed capacity, the Variable flow pump delivers only the right amount of oil to avoid unnecessary energy loss. The power needed to drive the oil pump is minimized and varies with engine speed.
Variable Swirl Technology
'Swirl' describes the phenomenon of air rotating inside the cylinder, much like a cyclone. As a result the air-fuel mix is optimised for engine speed conditions reducing fuel consumption, while also minimising the emission of CO2 and other pollutants like nitrogen oxides and particulates.
Among many other refinements, considerable attention was paid to the new engine's acoustic performance thanks to advanced work on combustion in order to deal with noise generation at source. Customers get a smooth, quality, refined ride experience.
"This is a remarkable engine, best in class in so many respects. It provides the dynamic driving performance expected of a 2.0-litre diesel yet produces fuel consumption and emission figures better than the 1.5-litre dCi unit," said Jerry Hardcastle, Vice President, Vehicle Design and Development, Nissan Europe. "Its refinement levels are a match for anything you'll find in the D-segment and with Stop / Start System its environmental credentials are all the more impressive. All in all, it's a perfect example of engine downsizing - and the philosophy behind Pure Drive - at work."
Around View Monitor
Qashqai will be available with Nissan's Around View Monitor: it's the first time such an innovative feature has been available on a C-segment car.
In fact, Nissan was the first manufacturer to introduce Around View Monitor anywhere in the world - made available in Japan on the Nissan Elgrand in 2007. In Europe the system has most recently been seen on the Infiniti EX and iconic FX
Combining the feeds from small cameras mounted on the front grille, tailgate and both door mirrors, the system projects an overhead 360° 'helicopter view' of the area around the vehicle onto the Nissan Connect satellite navigation and infotainment screen.
A natural progression from the rear facing parking camera pioneered by Nissan - its first application was on the 2002 Nissan Primera - Around View Monitor makes parking or slow speed manoeuvres simple and safe. The 360° helicopter view gives the driver a clear indication of obstacles around the car. The system switches on automatically when the car is placed in reverse or, while driving up to 10 km/h, by pressing the "camera" button on dashboard; then it switches off once the car has reached a set speed.
If preferred the feed from each camera can be displayed individually and the system can operate as a simple reversing camera which incorporates course lines on the screen to guide the driver to the correct path into the chosen parking spot.
Around View Monitor will make it first appearance on equipment laden special versions of Nissan Qashqai and Qashqai+2 due early 2012. As well as Nissan Connect and AVM - the two systems are interlinked - the special versions will also feature a full-length panoramic glass roof and smart dual tone black and silver 18inch alloy wheels. AVM will also be optionally available on Acenta and Tekna versions (depending on markets).
New CVT gearbox
The latest generation of Nissan developed continuously variable transmission will be introduced on 117PS 1.6-litre petrol-powered Nissan Qashqai models early 2012. The CVT version will increase Qashqai's market coverage.
The Nissan Qashqai range
Since its launch in March 2007, the Nissan Qashqai has redefined Europe's mid-size hatchback market. Designed and built in Europe, Qashqai - the original Crossover - adopted a genuinely fresh approach to a traditional, conservative sector of the market... and Nissan's bold stance has been a resounding success.
In under five years, European sales of Nissan Qashqai and its seven-seat sister Qashqai+2 have exceeded 1,000,000 units, with more than 80 per cent of sales going to first time Nissan buyers. The longer Qashqai+2 arrived in the autumn of 2008 to expand the appeal of the range still further.
March 2010 saw the first major change to Nissan Qashqai as a refreshed model was introduced to help it maintain its class-leading sales performance, a move that surprised many competitors who, at the time, were still playing catch up and had yet to bring their own crossovers to market.
There were visual changes including a new bonnet, grille, wings and new headlamps at the front and new rear lights and a re-profiled tailgate at the rear. The changes were set off by fresh designs of alloy wheel. Discreet aerodynamic improvements, including the adoption of full-length underbody panels, saw the CD figure fall to 0.33. As well as smoothing the airflow under the car, the panels helped reduce noise intrusion into the cabin.
Inside there were easier to read instruments and a great emphasis on quality with new materials, new colours and other subtle touches for a feeling of increased sophistication. Mechanically a number of small changes enhanced the vehicle's dynamics still further. Dampers were retuned for improved body control, reduced noise and better bump-thump absorption while the steering feel was also improved.
The basic mechanical layout remained unchanged with front- or ALL MODE four-wheel drive and fully independent suspension by sub-frame mounted struts at the front and a multi-link rear.
With the arrival of the new 1.6 dCi engine, the range line-up now encompasses two petrol and three diesel offerings. The entry-level 1.6-litre petrol develops 117PS while the 2.0-litre petrol produces 140PS. The entry-level diesel is the 110PS 1.5 dCi, while the 150PS 2.0-litre dCi unit remains to power the automatic 4WD version only. As before, the range runs through Visia, Acenta and Tekna specifications with the special version featuring a high level of equipment as well as reinforced exterior Crossover design.

Subaru Outback

Launched in Europe in 1996, the Subaru Outback pioneered the 'Crossover' concept, combining the comfort, interior space and superior on-road handling of a family estate, with the off-road capability and ground clearance of a sports utility vehicle. This special blend of abilities has now been further refined.
The new Subaru Outback is longer, wider and taller than the model it replaces. It is also more capable and more engaging to drive on-and off-road, and offers increased space and comfort for all occupants.

While it retains the bold, assured stance of its forebears, the new Outback boasts a distinctive new 'face'. There's a prominent grille which features Subaru's now-trademark 'wing' motif. This bold detailing, coupled with a pair of ultra-modern, three-dimensional headlamps, gives the go-anywhere vehicle a refined yet purposeful look.
In profile, the Subaru Outback's premium feel continues thanks to muscular, flared wheel arches, standard-fit 17-inch alloys, and a chrome-framed glass-house. Its roofline sweeps towards the rear, where it meets new body-coloured D-pillars.
On the inside, you'll find a sophisticated interior design that perfectly complements the new Subaru Outback's subtly muscular exterior lines. Subaru's design team focused heavily on producing a feeling of spaciousness and quality and, thanks to several improvements such as increased seat adjustability, softer cushioning and reductions in NVH levels, the Subaru Outback's cabin is an even more luxurious and cosseting place in which to travel.

Yamaha YZF-R6 MotoGP-style dress

Yamaha has prepared four models to celebrate the 50th anniversary of participation in Grand Prix racing. One model is the YZF-R6. Capacity of 600 cc sport bike will get new clothes as worn motor Jorge Lorenzo and Ben Spies in action in the MotoGP championship at Laguna Seca and Assen series. So what possessed this bike, let us look further.
 So strong sporty aura emanating from the self-R6. The corners are so sharp that menginsyaratkan aggressiveness seen in this bike. This is manifested in the fender, headlamp covers, fairing up to the stern. Display R6 with these new clothes can definitely be more in character. Moreover R6 into one of Yamaha's flagship product class middle-class motorsport.

 In order, R6 deltabox reinforced aluminum chassis that offers a perfect balance so nimble and light when in use. This chassis where the Yamaha MotoGP inspired innovation called Straight Frame Concept.
 To improve the driving comfort of course must have a quality suspension. Sector shock front upright and upside-down 43mm shock Monocross behind to conquer the vibrations or shocks when crossing bumpy road.
 Braking system, R6 uses dual 310mm discs are clamped by four-piston calipers for the front Brembo alerts. While the rear uses 220mm discs with single piston calipers.
 Yamaha R6 16-valve DOHC engine relies on four cylinders in line with a capacity of 599cc liquid cooling. By using a valve made from titanium famous lightweight but strong, so capable of producing tremendous power. These machines will be coupled with a six-speed transmission.

 Maximizing the exhaust of combustion in the chamber pacemaker kitchen, bearing manufacturer features the Yamaha tuning fork EXUP System (Exhaust Ultimate Power Valve) are pinned on the exhaust is made from titanium. The system is able to eliminate empty spaces so that power can be fully charged and are also able to suppress exhaust emissions

Kia Naimo electric concept

Making its world premiere at the Seoul Motor Show, the Kia Naimo electric concept car combines Korean heritage with innovative modern features.
Taking its name from the Korean word “Ne-mo”, (pronounced ‘Neh-mo’, meaning ‘square shape’), the KIA Naimo electric crossover utility vehicle (CUV) was conceived by Kia’s international design team in Seoul, and is characterized principally by its simple lines and solid, muscular stance.

The uncomplicated overall design is accentuated by a number of striking key details, such as the wraparound windscreen and asymmetric sunroof design, and the front and rear dot-style LED head- and positioning-lamps. Asian Celadon-style pottery, in particular, was a major influence on the car’s styling – with the pottery’s asymmetric form lending itself to the sunroof design, and the typical jade coloring giving Naimo its unique exterior finish.
Kia’s design team also made use of innovative technology features to give the KIA Naimo a premium feel and to ensure the car’s exterior remained uncluttered. For example, KIA Naimo has no traditional wiper blade on the windscreen – instead it employs a high-intensity air jet at the base of the windscreen that performs an ‘air wiper’ function. Conventional door mirrors have also been replaced with miniature cameras installed in the A-pillars.
KIA Naimo’s interior was designed to evoke a strong sense of tranquility and features hand-crafted materials throughout. Korean oak is used to trim the interior door panels and the entire interior floor, Korean “Han-ji” paper is used for the head lining. Alongside these traditional elements sit modern features such as a TOLED (transparent organic light emitting diode) storming display instrument panel and full device connectivity.
Measuring 3,890 mm in length, the KIA Naimo’s generous wheelbase, width and height (2,647, 1,844 and 1,589 mm respectively) – plus the short overhangs which place a wheel at each corner – ensure that the cabin provides exceptional head, leg and shoulder room for the occupants.
The KIA Naimo concept car has no B-pillars and features rear-hinged rear doors to maximize easy access to the cabin, and a three-way split opening trunk, allows versatile access to the load bay for varying luggage sizes.
Power comes from a PMSM (Permanent Magnet Synchronous Motor) electric motor with a maximum output of 80 kW (109 ps) and maximum torque of 280 Nm, enabling KIA Naimo to reach a top speed of 150 kph (93 mph).
A twin-pack 27 kWh battery is located under the trunk floor and uses innovative LiPoly (Lithium Ion Polymer) technology that offers numerous advantages over other battery types. Equipped with this battery, the KIA Naimo provides a driving range of 200 km (124 miles) on a single charge. To enhance range, the showcar is fitted with special low-drag 20-inch diameter alloy wheels.
Under the quick recharging cycle (50 kW) the KIA Naimo’s battery can be recharged to 80 percent of its capacity within 25 minutes. Under the normal cycle (3.3 kW), 100 percent power is attained after five and a half hours.

2012 Ford Blue Angels Mustang GT

The Ford Blue Angels Mustang GT pays tribute to 100 years of naval aviation, which will be celebrated all week at AirVenture 2011 as part of the show’s Tier 1 event status from the U.S. Navy tied to its yearlong Centennial of Naval Aviation festivities. The car will be on display inside the Ford Hangar throughout EAA AirVenture.
The exterior of Ford’s Blue Angels Mustang GT was inspired by the acclaimed naval aviation performance demonstration team and the F-18 Hornet aircraft it flies. The car’s custom rear spoiler’s vertical tailfins, the “screaming yellow” gloss accents, inclusion of the Blue Angels script and crest all are drawn from the Navy aircraft. The unique chrome blue paint, courtesy of Creations n’ Chrome, is unlike anything available on a production vehicle anywhere in the world.

With the Blue Angels crest stitched into its leather Recaro racing seats, the car’s interior also features offset stripes inspired by pilot flight suits.
Additional unique details of the Ford Blue Angels Mustang GT include cluster graphics, performance gauges, navigation screen images, safety belt fabric, instrument panel appliqués, rear seat-delete and cross-brace,

Blue Angels script in the illuminated sill plates and puddle lamps that project jet images when the doors open.
Under the hood, the Ford Blue Angels Mustang GT is all performance with a Ford Racing supercharged 5.0-liter V8 engine producing 624 horsepower. The Ford Racing components also include a handling pack, performance exhaust and racetrack brakes.

2012 Ford Focus Studio

The new Ford Focus Studio extends the all-new Ford Focus range to five series, with prices from £13,995 for the Focus Studio to £24,000 the top-of-the-range Titanium X with six-speed Powershift automatic transmission and 163PS TDCi engine.
This newcomer replaces the popular Ford Focus Sport, a final special edition of the previous model which has been on sale since October 2010 and reached sales of 15,000.

Nigel Sharp, Ford of Britain managing director, said: “With the high end of the new Focus range fully established, we are now making it easier for customers to get behind the wheel at the entry level – and this new Ford Focus Studio model is not only affordable but it is also well equipped, attractive and economical too.”
Standard equipment on the all-new Ford Focus Studio includes 16in sports-style alloy wheels, body-coloured rear spoiler, radio/CD player, USB connectivity, air-conditioning, electrically-operated body-coloured door mirrors with integrated turn indicators, electrically-operated front windows, Ford Easy Fuel ‘capless’ refuelling, and Electronic Stability Programme (ESP) with torque vectoring control.

The Ford Focus Studio will be offered as a five-door hatchback with 85PS 1.6 Ti-VCT powertrain, delivering a fuel efficient 47.9mpg. There will be three colour choices – Panther Black, Moondust Silver and Frozen White.

2011 Anderson Germany Ferrari F430 Scuderia Spider 16M

ANDERSON Germany transformed Ferrari
The performance of Ferrari Scuderia increase from 490 to now 569 hp resulted partly from a software optimization and from the exhaust system which, among other things, includes Renn-Kats and modified headers. And a three-level remote adjustable racing damper control is used as well. The weight savings achieved in this way were 29 kg; a rise of at least 38 hp as well as the special heat protection has positively influenced both security and performance.

The crew of the ANDERSON Germany equipped the Ferrari Scuderia with a set of three-piece glossy black wheels with carbon and yellow border and 20-inch 235er tires at the front and 325er – at the rear axle. The sport suspension is understandably in reasonable limits. The yellow brake caliper paint and window tinting still require a special mention.
The entire interior finishing was carried out with carbon black leather and Alcantara of the same color and yellow diamond Kederrand seams. The carbon package for the interior is in turn draws attention to the steering wheel, door handles, doorsill plates, handbrake lever and shift paddles. Sometimes one can mute the sound system with a DVD, a subwoofer and an amplifier and listen to the sound of the engine unit in silence…
Scuderia Spider 16M Conversion Edition through the exclusive reconstruction, which includes a front air dam, side skirts, a rear apron and adjustment of the exhaust system.
The bodywork was fitted with a black paint finish called Hyper Black. The Ferrari Scuderia Stripes are in carbon steel with a yellow border. A tint on front and rear lights is not unseen. The exterior carbon package includes an engine grille, a rear diffuser, mirrors and covers under the hood.

2011 Nissan 370Z GT Edition

The Nissan 370Z GT Edition recognises its heritage with a nod to the 1970s and the birth of the original Z car: special side stripes.
Grey ‘GT’ stripes running along the flanks of the car contrast with the each of the special edition’s three body colours – metallic black, pearl white and Black Rose, the latter shade exclusive to Nissan 370Z GT Edition. The exterior is set off by the standard 19inch RAYS forged alloy wheels, which are finished in a dramatic anthracite colour.

The Nissan 307Z GT Edition introduces a number of significant suspension and equipment improvements which have also been adopted by the standard Coupé. In deference to the higher average speeds routinely enjoyed in Europe, the changes have been engineered by technicians from Nissan Technical Centre Europe (NTCE). The principal modification has been to retune the dampers to provide the ideal balance between ride comfort and high-speed handling.
Equipment changes include the arrival of a rear view parking camera as part of the Nissan Premium Connect satellite navigation option and the standard fitment of a tyre pressure monitoring system. The advanced seven-speed automatic option now has a snow mode which, when applied, sets the car off in second gear and controls engine revs to prevent wheel spin on ice or snow. Refinement is enhanced by revisions to underbody insulation to reduce road noise.
Unchanged is the Nissan 370Z’s exceptional 3.7-litre V6 engine. A development of the unit that powered the 350Z, the all-alloy 24-valve twin cam not only develops more power and torque but is also more response, more refined and more fuel efficient.
The addition of VVEL (Variable Valve Event and Lift) technology helps deliver electrifying performance, the engine developing 328PS and an impressive 363Nm of torque. It is coupled to a short throw six-speed sports manual gearbox or a seven-speed automatic.
When in S-Mode, the manual transmission features Nissan’s Synchro Rev Control to ensures perfect rev matching when the driver is changing gear, delivering perfect ‘heel and toe’ changes every time.
Sensors on the clutch and on the gear lever itself monitor driver actions to blip the throttle on down shifts and maintain constant engine revs when changing up. As the sensors detect clutch pedal movement, the SRC system is primed, coming into operation when the gear lever is moved. By matching this information to vehicle speed, SRC knows whether the driver is slowing for a corner or changing up through the ‘box.
Downshift Rev Matching is a feature on the automatic gearbox, too, which also has Adaptive Shift Control which learns a driving style and adjust shift patterns accordingly.

The Nissan 370Z’s chassis is a car enthusiast’s dream: double wishbone front suspension and a multi-link rear end makes the most of Nissan’s agile FM (Front Midships) rear-drive platform.
With a shorter wheelbase, wider track and stiffer shell than its predecessor, the 370Z has starred on track as well as on road. The innovative GT Academy programme takes computer gamers who have become Gran Turismo experts on PlayStation 3 and turns them into real race drivers. Now in its third season, winners will again race for a place on the grid in a GT4 race prepared 370Z at the Dubai 24 hours in January 2012 and, perhaps, on to the GT pinnacle, GT1.

2011 Nissan 370Z Roadster

By starting design of the 2011 Nissan 370Z Roadster
When lowered, it tucks away under a body-coloured hard tonneau cover which also helps to reduce wind turbulence at speed, allowing occupants of the ‘double cockpit’ to enjoy fully the sounds and sensations of open air performance motoring.
Other design cues already seen on the Nissan 370Z Coupe have transferred to the Roadster. They include the distinctive boomerang LED rear and arrowhead front lights, while familiar ‘Z’ features such as the vertical door handles, twin tail pipes and ‘Z’ badges in the side repeaters are also present.
Inside the Nissan 370Z Roadster, the driver-focused cabin also boasts many features now synonymous with the Z, such as an engine Push Start button, floor hinged throttle pedal, centrally placed tachometer and three separate hooded dials – now including an oil temperature gauge – sitting centrally on the top of the dashboard and angled towards the driver.

The Nissan 370Z Roadster’s roof is fully automatic with no requirement to latch it manually into place. The roof can be lowered at walking speeds and can also be operated from outside the car, by pressing and holding the door-locking button for three seconds. It takes just 20 seconds for the roof to be raised and locked into place or lowered out of sight beneath its tonneau.
The fabric hood has been given a smooth inner lining covering the frame and reducing noise levels, while the system uses a new hydraulic pump that’s silent in operation in place of the electric motor used previously.
“At launch, both the Coupé and Roadster were highly acclaimed for their combination of excitement and style. The subtle suspension changes developed specially to meet European demands and tastes – not to mention the enhanced equipment levels – make the 2011 370Z more desirable than ever,” said Thomas.
at the same time as work began on the Coupé, Nissan designers have been able to ensure the soft-top version has a sophisticated silhouette with better, more natural, integration of the hood into the overall design.
The distinctive result echoes the ‘Z character’ with a blend of sweeping curves and aggressively short overhangs while the shape of the roof itself flows more naturally into the rear of the car when the roof is in place.

2012 Nissan Versa Hatchback

The 2012 Nissan Versa Hatchback is offered in 1.8 S and 1.8 SL models, each equipped with a 122-horsepower 1.8-liter DOHC 4-cylinder engine. The Nissan Versa Hatchback S is available with a choice of 6-speed manual or 4-speed automatic, while the Hatchback 1.8 SL is offered exclusively with Nissan’s advanced Xtronic CVT® transmission.

The 2012 Nissan Versa Hatchback long 102.4-inch wheelbase and short front and rear overhangs create a sporty dynamic look. The Versa Hatchback exterior also features body-color front and rear bumpers and body-color dual remote-controlled outside mirrors. Versa Hatchback has a coefficient of drag of 0.31. Versa Hatchback 1.8 SL models add a higher level of performance styling with a roof-mounted rear spoiler, lower body side sill extensions, unique front and rear fascia and standard fog lights.
The 2012 Nissan Versa Hatchback is available in nine exterior colors: Red Alert, Metallic Blue, Blue Onyx, Espresso Black, Brilliant Silver, Magnetic Gray, Super Black, Fresh Powder and Arctic Blue.
Every 2012 Nissan Versa Hatchback comes equipped with a standard 1.8-liter DOHC 4-cylinder engine rated at 122 horsepower and 127 lb-ft of torque. Three transmissions are offered – a 6-speed manual (1.8 S), an electronically controlled 4-speed automatic with overdrive (optional 1.8 S), and Xtronic CVT™ transmission (standard on 1.8 SL).
Fuel economy for the 2012 Nissan Versa Hatchback is rated at 28 mpg City/34 mpg Highway with the Continuously Variable Transmission; 24 mpg City/32 mpg highway with the 4-speed automatic transmission; and 26 mpg City/31 mpg Highway with the 6-speed manual transmission.
All 2012 Nissan Versa Hatchbacks are equipped with an independent MacPherson strut front suspension and torsion beam rear suspension, with front and rear stabilizer bars. Other standard equipment includes Electric Power Steering and power-assisted front disc/rear drum brakes and Anti-lock Braking System (ABS) with Electronic Brake force Distribution (EBD) and Brake Assist (BA). Vehicle Dynamic Control (VDC) is also standard.
Nissan Versa Hatchback 1.8 S models feature 15-inch styled steel wheels with covers and P185/65HR15 Continental all-season tires. Nissan Versa Hatchback 1.8 SL models offer standard 16-inch aluminum-alloy wheels with Continental P195/55R16 all-season tires, while 6-spoke 15-inch aluminum-alloy wheels are optional on 1.8 S models equipped with the 4-speed automatic transmission.
The 2012 Nissan Versa Hatchback is manufactured at Nissan’s Aguascalientes and Cuervanaca, Mexico assembly plants.

Nissan Micra DIG-S

Nissan Micra DIG-S. Powering the newest version of the popular Nissan Micra city car – the DIG-S – this advanced petrol engine produces just 95 g CO2/km and underlines Nissan’s leadership in both zero and low emissions mobility.
A direct injection unit with a supercharger – hence the car’s name: Direct Injection Gasoline-Supercharger (DIG-S) – the engine is the embodiment of Nissan’s PURE DRIVE strategy, delivering sparkling performance, frugal economy and exceptionally low emissions.

Technical innovation has been packed into the engine. The Nissan DIG-S uses the Miller cycle and direct petrol injection to raise the compression ratio to 13 to 1 for greater combustion efficiency and a supercharger for instant throttle response and added power. As well as delivering ultra low CO2 emissions, the lightweight, low-friction 1,198cc three-cylinder unit produces the power expected from a conventional 1.5-litre four-cylinder engine.
Nissan Micra’s city car credentials have been honed over decades of class leading models. Bristling with new technologies and based on a brand new platform, Europe-bound examples of the fourth generation Nissan Micra are built at an entirely new facility in India. It is also built in China, Mexico and Thailand and is sold in 160 countries around the world.
The new Nissan Micra DIG-S is available in one body five-door body style, three trim levels – Visia, Acenta and Tekna – and with a choice of two petrol engines. As well as the DIG-S, there’s a normally aspirated version of the 1.2-litre engine, developing 59kW (80PS).

By minimising heat, friction and pumping losses as much a possible, Nissan’s engineers have created an engine that sets the standard for the rest of the industry. Its three-cylinder configuration gives many benefits including less weight and further reductions in friction loss, thanks to having fewer moving parts. Further gains are made thanks to the adoption of advanced engine management systems with Start/Stop and energy regeneration.
The Direct Injection Gasoline-Supercharger (DIG-S) engine produces 72kW (98PS) and 142Nm, while CO2 emissions are 95 g/km for the manual version and 115 g/km for the CVT version. Maximum speed is 180km/h for manual. Combined cycle fuel economy figures for the manual Visia version is 4.1 l/100kmh *.
In common with industry practice, these headline figures refer to the entry-level version – Visia – as higher levels of equipment found in plusher models mean extra weight which affects emissions performance. But such is the efficiency of the unit that the most popular version, Acenta, also promises an outstanding CO2 figure: just 99 g/km in manual form.
This remarkable engine makes sub 100 g/km emissions performance easily accessible while low cost of ownership make it a serious alternative to a comparable diesel… with the added bonus of greater refinement. Its first appearance powering the new Nissan Micra makes for an irresistible combination.

Nissan Sunny

Nissan Motor Co., Ltd. unveiled an all-new sedan model at the 8th China (Guangzhou) International Automobile Exhibition. Using the famed 'Sunny' name in China, this new model will go on sale first in China in January 2011 and then progressively across 170 countries worldwide under different vehicle brand names.
The Nissan Sunny was first introduced in China in 2003 and was significant as the first locally built model from the new Dongfeng Nissan partnership. Acclaimed by consumers for its combination of quality, space and driving performance, the Nissan Sunny quickly help establish a foundation for the Nissan brand in the passenger vehicle market in China.

A projected class leader in fuel economy, the all-new Nissan Sunny is expected to appeal to young families in their 30s looking for a medium sized sedan that combines a dynamic upscale design with the space, quality and features associated with the Sunny and Nissan brand.
Combining the proven Nissan 1.5-liter HR15DE engine with dual injectors and a new-generation Xtronic CVT with an auxiliary transmission, both of which are newly introduced in China, Nissan Sunny delivers ease in handling for city driving where there's frequent acceleration and deceleration, and superior environmental performance as a projected class leader in fuel economy.
MacPherson struts are used for the front suspension and a torsion beam for the rear suspension, making for sporty and agile driving at low speeds, and steady and stable driving at higher speeds.
The new Nissan Sunny will be produced in Dongfeng Nissan's Huadu Plant in Guangzhou and will be priced from RMB 82.8K to 112.8K (1.04 million - 1.41million yen).
At the 8th China (Guangzhou) International Automobile Exhibition, Nissan Motor Co., Ltd. unveiled an all-new sedan model “Sunny”. The Nissan Sunny was first introduced in China in 2003 and was significant as the first locally built model from the new Dongfeng Nissan partnership.

The all-new Nissan Sunny is expected to appeal to young families in their 30s looking for a medium sized sedan that combines a dynamic upscale design with the space, quality and features associated with the Sunny and Nissan brand. The 2012 model projected class leader in fuel economy.